torelucid.blogg.se - Boss tu3 chromatic tuner

This indicator shows whether the effect is on or off, and also doubles as the battery check indicator. If the TU-3W is connected after other effect units, you won’t be able to tune correctly. * If you connect other effect units, you must connect them after the TU- 3W. * Normal brightness is automatically selected when you turn on the power. To return to normal brightness, hold down the STREAM/CENT for two seconds or longer once again. To switch to High Brightness mode, hold down the STREAM/CENT button for two seconds or longer.

Changing the Meter’s Brightness (High Brightness mode) By switching the meter to High Brightness mode, you can increase its visibility when performing outdoors.

* When you turn on the power, the current reference pitch will be displayed for several seconds. * If you allow several seconds to elapse without pressing the MODE button or STREAM/CENT button, the TU-3W will return to normal operation. STREAM/CENT button: Lowers the reference pitch by 1 Hz. MODE button: Raises the reference pitch by 1 Hz. Press the MODE button or STREAM/CENT button to change the reference pitch. The lowest digit of the current reference pitch (e.g., “0” when set to 440 Hz) blinks in the Note Name/String indicator.Ģ. Press the MODE button and STREAM/CENT button simultaneously. You can adjust the reference pitch over a range of 436-445 Hz. * This setting remains stored even after the power is turned off. * The TU-3W returns to its normal state when several seconds have elapsed without the STREAM/CENT button being pressed. Off: The meter lights up at the left and right. On: The meter lights stream to the center from the left and right. Press the STREAM/CENT button again to toggle the Accu-Pitch Sign function on/off.

While holding down the STREAM/CENT button, turn on the power (insert a plug into the INPUT jack).Ģ. Having the Meter Indicate Completion of Tuning (Accu-Pitch Sign function) When the Accu-Pitch Sign function is on, the meter lights stream toward the center of the display when stable tuning at the correct pitch is reached.ġ.* The sound from the OUTPUT jack is muted when the tuner is on. The behavior is different when you’ve selected the STREAM display. * The meter behavior described here is when the CENT display is selected (the factory setting). * When the Accu-Pitch Sign function is on, the meter lights stream toward the center of the display when stable tuning at the correct pitch is reached. Or farther toward the right as the pitch gets sharper. (Cent display) The meter will light farther toward the left as the pitch gets flatter, Tune the instrument so that both Tuning Guide indicators are lit and the center of the meter is lit green. The note name or string number closest to the tone being played appears in the display. Play a single note on your guitar or bass, and tune it.

Press the pedal switch to turn the tuner on.Connect the guitar or bass you want to tune to the INPUT jack.Switching on the tuner automatically mutes the output signal, allowing you to tune without outputting the sound.Flat tuning is supported with Guitar Flat mode, which allows for “down” tunings up to six semitones below standard pitch.Guitar/Bass mode lets you tune by string number, with support for 7-string guitars and 6-string basses.Accu-Pitch Sign function uses the motion of the meter’s lights to show when tuning is completed.

High Brightness mode enhances meter visibility outdoors.TU-3W features a function that allows you to switch between the true bypass and buffered bypass.